Products

WR1000

Single Base Station GNSS Receiver

Support BDS, GPS, GLONASS, Galileo and other multi-system multi-frequency tracking at the same time, static monitoring accuracy up to millimeter level; Support 4G, Lora, Wi-Fi, NB-IoT and other communication methods to meet the communication requirements of different monitoring environments; The receiver can directly calculate the displacement of the monitoring point and other relevant information.

Download information:

WR1000.pdf

Category:

Receiver

Quotation

Sample

Product Introduction

WR1000 uses the high-precision GNSS positioning module developed by MENGXIN,which supports simultaneous tracking of multiple systems and frequency points such as BDS, GPS, GLONASS, Galileo, and supports 4G global communication, Lora, and WiFi communication, meeting communication requirements in different application environments. WR1000 has a friendly user interface and operation mode,and can report device location, network status, signal strength, power supply system voltage and current information. It can remotely configure, restart, set, upgrade and other operations on the receiver on the remote configuration platform. With built-in battery and low power consumption design, WR1000 can effectively reduce the requirements on the capacity of the power supply system. It is suitable for use in universal reference stations and portable high-precision GNSS data collection scenarios.

Features

Multi-system,multi-frequency,

high precision and high quality original observational data

•multi-system and multi-frequency simultaneous tracking of BDS,GPS,QZSS,Galileo,GLONASS

•High quality and stable RTCM3.X raw observation output

High integration,

low cost,and time-saving

•Built-in integrated antenna

•Built-in MEMS sensor

•Built-in 4G global communication,Lora,WiFi communication module

Ultra low power consumption,

fearless of continuous cloudy and rainy weather in the wild

•Power consumption less than 1W in typical work scenarios

•Low requirements for external power supply devices

Waterproof and dustproof,

high reliability

•Passed IP68 waterproof and dustproof certification

•Passed 50,000 hours MTBF certification

Remote configuration,

efficient and worry free

•Local configuration management through serial port or WiFi

•Remote configuration management through the remote configuration platform

Specifications

Communication Technical Index
Communication Mode	4G global communication, WiFi, Lora
Communication Protocol	TCP, MQTT, Ntrip
GNSS Technical Index
Signal Tracking	BDS B1I, B2I, B3I, B1C, B2a
	GPS L1C/A, L2C, L2P, L5
	GLONASS L1, L2
	Galileo E1, E5a, E5b
	QZSS L1C/A, L2C, L5
Static Relative Positioning Accuracy	Horizontal: ±(2.5mm+0.5ppm) RMS
Static Relative Positioning Accuracy	Vertical: ±(5.0mm+0.5ppm) RMS
Single Point Positioning Accuracy	Horizontal: 1.5m Vertical: 2.5m
Initialization Reliability	＞99.9%
Timing Accuracy	10ns
Data Format	RTCM V3.X
Data Format	NMEA-0183
Data Update Rate	1Hz, 2Hz, 5Hz, 10Hz
Pseudo-range Observations Accuracy	≤10cm
Carrier Observation Accuracy	≤1mm
Kinematic Relative Positioning Accuracy	Horizontal: ±(8mm+1ppm) RMS
Kinematic Relative Positioning Accuracy	Vertical: ±(15mm+1ppm) RMS
RTK Initialization Time	＜5s
Velocity Measurement Accuracy	0.03m/s
Interfaces
Power/Data interface	1*5PIN LEMO（Power + RS232）
Lora Antenna	1*SMA
Sensor Interface	1*6PIN LEMO（RS485）
Others	1Micro SD；2Micro SIM
Physical
Size	∅200mm×138mm
Indicator LEDs	Power, GNSS, SD, 4G, WiFi
Operating Temperature	-40℃~+85℃
Operating Voltage	9V~36V DC
Waterproof and Dustproof	IP68
Storage	32GB
Weight	≈2000g
Built-in Battery	55.5Wh（Rated voltage 7.4V）
Storage Temperature	-40℃~+85℃
Operating humidity	95% no condensation
MTBF	60000h
Power Consumption	≈1W（Typical scenario）