Products

WR1100

Base Station GNSS Receiver

Full-frequency high-precision geodesic GNSS receiver, split design, with OLED display and button function, easy for users to set quickly; Can be connected to GNSS, 4G, Wi-Fi antenna, to provide stable, high-quality, high-frequency original observation data; With serial port, USB, network port, PPS, OSC and other abundant external interfaces; 4G dual network communication module scheme is adopted to support network independent switching.

Download information:

WR1100.pdf

Category:

Receiver

Quotation

Sample

Product Introduction

WR1100 is a full-system, full-frequency and high-precision GNSS receiver developed by MENGXIN for the terminal GNSS application market. The receiver adopts a split design, with its own OLED display and button function, which is convenient for users to set up quickly, and can be connected to GNSS, 4G, and WiFi antennas to provide stable, high-quality, high-frequency raw observation data. WR1100 has serial port, USB, network interface, PPS, OSC and other external interfaces, and adopts 4G dual network communication module solution so that it can support network independent switching. WR1100 is suitable for professional CORS reference station, earthquake monitoring, meteorological monitoring and other fields.

Features

Full-system,full-frequency,

high precision and high quality original observational data

•full-system and full-frequency simultaneous tracking of BDS,GPS,QZSS,Galileo,GLONASS

•High quality and stable RTCM3.X raw observation output

powerful system,

easy to operate

•Linux system,compatible design solution

•Large OLED display with key function,easy to set up

A variety of external interfaces

and communication methods,easy to expand

•External ports such as serial port,USB,network interface,PPS and OSC

•Communication mode such as serial port,network interface,USB,4G,WiFi,BLE

•4G dual network communication solution,support network independent switching

Mass storage

•Internal 64GB,support for external 1T hard disk

•Compress data format to reduce data volume

Use remote configuration to be efficient

and hassle-free

•Local configuration management through serial port or WiFi

•Remote configuration management through the remote configuration platform

Specifications

Communication Technical Index
Communication Mode	4G global communication, WiFi, BLE
Others	serial port, network interface, USB
GNSS Technical Index
Signal Tracking	BDS B1I, B2I, B3I, B1C, B2a
	GPS L1C/A, L2C, L2P, L5
	GLONASS L1, L2
	Galileo E1, E5a, E5b
	QZSS L1C/A, L2C, L5
Data Update Rate	1Hz, 2Hz, 5Hz, 10Hz, 20Hz
Static Relative Positioning Accuracy	Horizontal: ±(2.5mm+0.5ppm) RMS
	Vertical: ±(5.0mm+0.5ppm) RMS
RTK Initialization Time	＜5s
Velocity Measurement Accuracy	0.03m/s
Data Format	RTCM V3.X
	NMEA-0183
	RINEX
Pseudo-range Observations Accuracy	≤10cm
Carrier Observation Accuracy	≤1mm
Single Point Positioning Accuracy	Horizontal: 1.5m Vertical: 2.5m
Kinematic Relative Positioning Accuracy	Horizontal: ±(8mm+1ppm) RMS
	Vertical: ±(15mm+1ppm) RMS
Initialization Reliability	＞99.9%
Timing Accuracy	10ns
Interfaces
Power/Data Interface	1*8PIN LEMO (Power + RS232 + RS485)
IOT Card Interface	2*Micro SIM
WiFi/BLE Antenna	1*SMA
4G Antenna	1*SMA
EVENT	1*SMA
Network Interface	1*RJ45
USB	1type A；1type Micro-B
GNSS Antenna	1*TNC
OSC	1*TNC
PPS	1*SMA
Physical
Housing	split, aluminum alloy shell, battery compartment design
Size	217x166x78mm
Weight	≈2200g
Operating voltage	9V~36V DC
Power consumption	<3W（Typical scenario）
Storage	64GB
Vibration Standard	GB/T-2423
Built-in Battery	15000mAh
Operating Temperature	-40℃~+85℃
Storage Temperature	-55℃~+85℃
Operating Humidity	99% no condensation
Waterproof and Dustproof	IP68
MTBF	60000h
Impact standard	GB/T-2423